HPP power inductor
HPP028-20-181 · 175 µH, 28 A power inductor, 20 kHz
Powder-core toroidal power inductor with Litz winding and flying leads for DC/DC boost and buck stages at 20 kHz.
Standard series · HPP
Preliminary · design dataHPP028-20-181
175 µHInductance ±8 %, 10 kHz / 1 V
28 A rmsRated current, 20 kHz incl. ripple
46.7 ASaturation current (L ≥ 80 %)
15.78 mΩDCR typ. at 25 °C
53 KTemperature rise, Ta 50 °C, still air
≈ 560 gWeight approx.
Electrical characteristics
| Parameter | Condition | Value |
|---|---|---|
| Inductance L0 | 10 kHz, 1 V, 0 A DC | 175 µH ±8 % |
| Rated current Irms | 20 kHz, ripple incl., Ta ≤ 85 °C, natural convection | 28 A |
| Saturation current Isat | L ≥ 80 % of nominal L0 | 46.7 A |
| Ripple current | at 20 kHz (design basis) | 8.4 A pk-pk |
| Switching frequency | design frequency | 20 kHz |
| DC resistance | 25 °C, 4-wire | 15.78 mΩ typ. |
| Power loss | rated current, Ta 50 °C | 17.9 W typ. |
| Temperature rise | rated current, Ta 50 °C, still air | 53 K typ. |
| Operating ambient | at rated current | −40 … +85 °C |
| Insulation class | winding system | F (155 °C) |
| Power rating / max. bus voltage | D = 0.5 (buck / boost), design ripple; P ≈ ½ · Vbus · Irms | 1.5 kW at Vbus ≤ 107 V |
Mechanical
| Outer diameter | ≤ 88 mm |
| Height | ≤ 26 mm |
| Free inner bore | ≥ 33 mm |
| Weight | ≈ 560 g |
| Termination | Flying leads, stripped and solder-tinned |
| Core | Distributed-gap powder toroid, coated |
Same rating, other frequencies
Neighbouring ratings (20 kHz)
Preliminary design data – typical values to be confirmed on first samples. L-bracket or base-plate mounting, aluminium winding and forced-air ratings on request. Specifications subject to change without notice.
Next step
Send us your spec.
Power, voltage, frequency, mounting and target standard – we scope design and production with you.